Innovation & Technologies » Moulds
Moulds
PILOT MOULD DESIGN
 |
Cooling circuits designed and optimized to obtain the maximum performances.
The pilot mould cooling circuit simulates exactly the production cavity cooling channels.
|
PILOT MOULD PROJECT
 |
The mould engineering (bottle neck, shoulder, body and bottom), as well as the type of materials to be used for the mould manufacturing are duly studied.
|
INDUSTRIAL MOULD PROJECT
 |
The mould project is made with the purpose to obtain the best performances and the longest life time, considering the minor intervention maintenance |
 |
All the mould details are duly evaluated by the Product Department and have to be approved by a dedicated team before starting the tooling manufacturing.
The mould documentation supplied to customers is very wide and detailed, allowing the customer to proceed with a quick identification of the material used, spare parts and important specifications in case of standard maintenance. |
MOULD MAKERS CHECK LIST
 |
Moulds are manufactured as per Techne specifications; mould makers strictly follow the project check list to certificate the supply.
|
MOULD CAVITY CONTROL
 |
Upon request, it is possible to control the dimensioning of each cavity in check the repeatability as per CP/CPK procedures. Such a control can be made through optical or contact system.
|
 |
By comparing the 3D cavity scanning with the 3D file of the cavity design or of the pilot mould, it is possible to verify the repeatability of all the cavities as well as their volumetric analysis. |
Newsroom
TECHNE at HISPACK exhibition 2012 TECHNE at PLAST 2012 TECHNE at CHINAPLAS 2012 TECHNE at NPE 2012 TECHNE at Gulfood Exhibition 2012 TECHNE at Upakovka Upak 2012 (Moscow) TELETECH® tele-assistance for extrusion blow-moulding machines advance series In mould labelling system for full electric machine Now available B&R PLC upgrade for system series Mayor of Castel Guelfo visits Techne Graham European Parliament member Mr. Vittorio Prodi visits Techne Graham